<!--end title--!>

Toshiba AX-8 Belt FRW 8.5
Toshiba SL-5/C Belt SCX 8.0
Toshiba SL-5/C Belt SCX 7.0
Toshiba SL-50 Belt SCX 8.0
Toshiba SL-50 Belt SCX 7.0
Toshiba SL-77 Belt SCQ 3.2
Toshiba SL-3046/C Belt, Drive A SCY 8.2
Toshiba SL-3046/C Belt, Drive B SCY 6.0
Toshiba SL-3066/C Belt SCY 8.6
Toshiba SL-3127 Belt SCY 4.2
Toshiba SL-3127 Belt, Main SCX 7.4
Toshiba SL-3147 Belt SCY 4.2
Toshiba SL-3147 Belt, Main SCX 7.4
Toshiba SM-200/M Belt SCX 8.0
Toshiba SR-40/E Belt FRX 16.8 $14.00
Toshiba SR-50 Belt FRX 16.8 $14.00
Toshiba SR-80 Belt FRX 16.8 $14.00
Toshiba SR-230 Belt FRX 25.0
Toshiba SR-250 Belt FRY 23.6
Toshiba SR-305 Belt FRX 25.0
Toshiba SR-A100 Belt FRX 25.0
Toshiba SR-A102 Belt FRX 25.0
Toshiba SR-A270 Belt FRX 25.0
Toshiba SR-A272 Belt FRX 25.0
Toshiba SR-B20 Belt FRX 25.0
Toshiba SR-B150 Belt FRX 25.0
Toshiba SR-B152 Belt FRX 25.0
Toshiba SR-F450 Belt FRY 23.6
Toshiba SR-F451 Belt FRY 23.6
Toshiba SR-F452 Belt FRY 23.6
Toshiba SRF-100 Belt FRX 23.6 <!--begin foot--!>

If your turntable is not listed, first look for a close match in model number. If that model's belt doesn't look like a match, then take careful measurements of your old belt's inside circumference, width and thickness.

Make the measurements with the belt lying flat and unstretched.  Use a paperclip to mark your starting point.  Measure in inches to match model; one inch=25.4mm.  Also, make note of how loose the old belt is while installed in the turntable.  Does it slip?  How much side-to-side deflection is there in the open section between the spindle and the platter?   Depending on how badly stretched out your old belt is, deduct 5 to 10 percent from the circumference.  If the belt is broken or missing, use a piece of string (wrapped without slack, but not stretched) to measure the proper circumference.  Either email me the measurements or browse available belt selection to find a suitable replacement.